请选择 进入手机版 | 继续访问电脑版

机锋论坛

  • 关注机锋
  • 关注机锋
 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 68|回复: 2

[ROM相关] LG v410刷砖、降级、root、刷cm等大全集

[复制链接]

3

主题

0

好友

77

积分

初中生

Rank: 3Rank: 3

  • TA的每日心情
    无聊
    2017-3-2 11:00
  • 签到天数: 13 天

    [LV.3]偶尔看看II

    G币
    28
    最后登录
    2017-3-29
    注册时间
    2011-11-12
    发表于 2017-3-10 10:28 |显示全部楼层

    马上注册,结交更多机友,下载更多应用,让你轻松玩转手机。

    立即注册 已有帐号?点击登录   下载游戏和软件,请【猛击这里】进入机锋市场!

    ×
    本帖最后由 zuoluo2008 于 2017-3-10 19:06 编辑

    这个小平板在中文网里基本找不到有用的资源。花了很久,终于把各种需要的资料和软件收集全了。按照说明书一步一步搞,一般都能搞定,省的去淘宝花60块刷机。

    关机状态下,按音量+键并连接pc,进入download刷机模式。或者在关机状态下同时按音量-键和电源键,出现LG后立刻松开两键并迅速再次按住电源键,进入恢复模式,选两次yes后进入rec,可以关机重启等操作。

    链接:http://pan.baidu.com/s/1kUGU187  


                                w密qd码9


    2楼的中文是我对着百度翻译搞的,哪位大神路过发现错误请跟帖指出来,谢谢!



    ............
    乐phone之家  安卓论坛刷机

    3

    主题

    0

    好友

    77

    积分

    初中生

    Rank: 3Rank: 3

  • TA的每日心情
    无聊
    2017-3-2 11:00
  • 签到天数: 13 天

    [LV.3]偶尔看看II

    G币
    28
    最后登录
    2017-3-29
    注册时间
    2011-11-12
    发表于 2017-3-10 11:25 |显示全部楼层
    本帖最后由 zuoluo2008 于 2017-3-17 13:01 编辑

    教程:v410 从 5.1 降级到 4.4 ,root并修复分区
    本文来自于下面的链接:
    https://forum.xda-developers.com/g-pad-10/general/tutorial-lg-gpad-v410-5-1-to-4-4-t3232150
    [Tutorial] LG Gpad v410 5.1 to 4.4 downgrade, root, & internal storage fix.
    383 posts
    Thanks: 139

    This method will indirectly allow you to root the LG Gpad v410 after it has been upgraded to Lollipop 5.1.1. Yes. Rooting LG v410 Lollipop. It's through a downgrade, but it works.
    此方法将允许你在升级到5.1.1后root并降级 。是的,root设备,并降级,但依然可以正常使用。

    It took a while to get working, but here's how I did it. The process is straightforward, but the details matter greatly. You will brick your device if you mess up. Please read everything *first* before you do anything. Be sure you understand the process. I'll try to explain what's going on along the way.
    过程很简单,但细节很重要,搞不好就会变砖。千万小心,做之前,请确保你理解每一步的过程,我尽量解释清楚。

    An external SD card is extremely helpful for this process. You *could* adb push everything, but that will tedious.
    准备一个SD卡,将很有帮助,虽然adb也可以,但那麻烦多了。

    First, you need some files.
    首先,需要下面的一些文件:

    The 4.4.2 KDZ which is a TEST OS, but it can be rooted and it downgrades to a Bump'able bootlaoder:
    http://forum.xda-developers.com/g-pa...-v410-t3224867

    The LG 2014 Flash Tool:
    http://www.mediafire.com/download/fw..._Tool_2014.zip

    Android LG Drivers:
    https://www.androidfilehost.com/?fid=24052804347802528

    Parted for Android. You can probably find it other places, but I found this file:https://dl.dropboxusercontent.com/u/...-all-files.zip

    EDIT: There seems to be a lot of confusion here. My bad. All you need is the file named "parted" from this zip file - nothing else. Just put that one file in the root of your external SD card.
    编辑:这么多文件,我晕了。所有的zip文件里,只需要将 parted这个文件放在SD卡根目录

    linked from here: http://www.droidviews.com/your-32gb-...heres-the-fix/
    The Candy5 ROM (This will potentially save you some manual steps. Somewhat optional, but highly recommended):
    http://forum.xda-developers.com/g-pa...-1-v2-t3111987
    Candy5 ROM(这会节约你动手的步骤。强烈推荐)

    Flashify APK:
    http://www.apkmirror.com/apk/christi...-apk-download/

    TWRP for the v410:
    http://forum.xda-developers.com/g-pa...0-410-t3049568

    LG One Click Root:
    http://forum.xda-developers.com/lg-g...lipop-t3056951
    (You may use Purple Drake or whatever else you want. They all use the same root script as this does and the GUI is helpful for novices.)
    Android SDK (specifically adb.exe. After installing go to SDK Manager and ensure that Android SDK Platform Tools is checked):
    http://developer.android.com/sdk/index.html
    SDK工具很重要(特别是adb。安装后转到SDK管理器并确保选中SDK平台工具)

    For clarification below, when I have commands in "quotes" they are Windows commands. When they are in `backticks` they are commands that you run inside of ADB which actually run on your device....as root. Root can screw things up. Please be extra cautious. If you blame me for messing up your device I will laugh at you. But that's not gonna happen, right? Good. Let's go.
    下面引号内的是ADB命令,千万小心别搞砸了。

    Now that you have everything, put it all into a folder where you can access it easily.
    现在把所有文件放在一个文件夹里,方便访问它们。
    1.        Install the LG Drivers.
    安装LG驱动

    2.        Install Android SDK (or otherwise get adb.exe).
    安装SDK(这个可以不要,只用adb套件就可以了)

    3.        Extract all of the archives.
    解压所有文件到一个文件夹

    4.        Move the KDZ to the LG Flash Tool 2014 folder.
    将KDZ文件拷贝到Flash Tool 2014文件夹

    5.        Put the tablet into Download Mode by powering it off, holding VolUp, and plugging in the USB cable. Press VolUP when instructed. You must be in Download mode before continuing.
    将平板关机,按住音量+键,并插入电脑USB接口,平板会进入Download模式,松开按键

    6.        Run LGFlashTool2014.exe. Select the KDZ file. Click "CSE Flash". Click "Start". Select "English" and click OK. Do not change anything else.
    运行LG FlashTool 2014,选择KDZ文件,点击CSE Flash,然后点击Start,选择Chinese并点击OK,其它部分不要改动。

    7.        WAIT for the flash to continue. If you really want to brick your device, here's a good opportunity.
    等待程序自动进行,如果你希望变砖,这个地方是个好机会。

    8.        The device will reboot into Android 4.4.2. You will only have 4GB of internal storage at this point. DON'T PANIC! We are fixing it.
    平板将重新恢复到安卓4.4.2。但是内存只有4G了。不要惊慌,下面将进行修复。

    9.        Enable USB debugging.
    打开USB调试模式

    10.        Connect the device.
    将平板连接电脑

    11.        Install and run LG One Click Root. Wait for the device to be rooted before proceeding.
    安装LG One Click Root并运行。等一会儿,平板重启后Root成功。

    12.        Copy the Flashify apk, TWRP image, and Candy5 ROM to your external SD card.
    拷贝Flashify.apk和TWRP文件到SD卡,(TWRP最好是2.8.5.0这个版本的img文件。)

    13.        Install Flashify and flash TWRP to the recovery partition.
    安装Flashify并运行刷入img文件

    14.        Use the Flashify menu to reboot in to recovery.
    重启进入recovery界面

    15.        DON'T PANIC! You will get white vertical lines on the boot screen from now on. They only show up during boot animations. A small price to pay. This may be fixed at a later date. for the time being! Thanks to marcsoup's first post ever, we have a fix! Details below. PLEASE click this link and thank him!
    不要惊慌,屏幕会出现竖条。只会在启动画面出现,算是小小的代价吧,本教程的后面,我们会修复它。暂时先不管它!谢谢marcsoup首先提出方案,详情请点击链接并感谢他!

    16.        Things get tricky here. Copy parted to your external SD card and then run "adb shell" from Windows to get a shell in TWRP.
    到这儿,问题变得棘手了。复制parted文件到外置SD卡,输入‘adb shell’进入TWRP

    17.        In TWRP, unmount /data by tapping Mount > uncheck Data.
    在TWRP界面,通过点击Mount取消选中 /data,这样会卸载 /data文件夹。

    18.        `cp /sdcard/parted /sbin/` This copies the parted binary to /sbin so it can be executed in the path. I had trouble running `/sdcard/parted`, but YMMV.
    在电脑adb界面里输入‘ cp /sdcard/parted /sbin/ ’将parted这个二进制文件复制到 /sbin,以使它能在下面的步骤中被使用。终于好不容易运行到‘/sdcard/parted’,但你的感受也许不同。

    19.        `chmod +x /sbin/parted` Make it executable.
    ‘chmod +x /sbin/parted’,为文件添加可执行权限。

    20.        `parted /dev/block/mmcblk0` Run parted against the internal mmc
    ‘ parted /dev/block/mmcblk0’,这个操作针对内存mmc。

    21.        `p` Prints the partition table.
    ‘p’显示分区表

    22.        `rm 34` Deletes partition 34 labeled "grow". This is the root of our problem. The KDZ apparently only creates a 4GB partition, I assume so the test build has maximum compatibility with all sized devices.
    ‘rm 34’删除标记为‘grow’的分区34。这是问题的根源。这个KDZ只能创建4G的分区,我估计生成这个尺寸是为了最大化兼容各种内存规格的平板

    23.        `rm 33` Deletes partition 33 "userdata"
    ‘rm 33’删除分区 33 的“userdata”

    24.        `p` Print to verify
    ‘p’显示验证

    25.        `mkpartfs` Create a partition and put a filesystem on it. If we only expand the partition it won't help us because the filesystem is still only 4 GB.
    ‘mkpartfs’创建分区并在其上放置一个文件系统。如果我们不创建只扩展分区是没有用的,因为文件系统仍然只有4G。

    name: userdata
    name:输入 userdata

    type: ext2 (the tool only supports ext2. This is ok for now.)
    type:输入ext2 ,这个工具只支持ext2,不过这里够用了。

    start: 3439MB (the end of part 32. IT MAY BE DIFFERENT FOR YOU!) Be sure you do not omit the MB part otherwise the offset will overwrite another critical partition.
    Start:输入 3439MB (在part32结束,你的或许有点不同!),确保不要遗漏MB,否则偏移量会覆盖另一个关键的分区。

    end: 15.8GB (where "grow" ended above. IT MAY BE DIFFERENT FOR YOU!) Be sure you do not omit the GB part otherwise the offset will overwrite another critical partition.
    End: 输入15.8GB ,(‘grow’分区结束的地方,你的或许数字有点不同!)。确保不要遗漏GB,否则会覆盖另一个重要分区。

    26.        `p` Verify. For me it did not name the partition properly. Gotta fix that.
    ‘p’验证是否正确,对我来说,只要名称和分区正确,就没有问题。

    27.        (if necessary) `name 33 userdata` This is critical for mount to find it in /dev/block/platform/msm.sdcc.1/by-name/ on some/all ROMS.
    (如果需要),‘name 33 userdata’,这是个关键的安装,                                                        /dev/block/platform/msm.sdcc.1/by-name/  ,在some/all ROMS上找出来

    28.        `p`. Verify one last time. Compare it to my partition table in the attachments. If you want to brick, delete some random partitions here.
    ‘p’最后一次验证,相比我附件中的分区表,如果要成砖,删除一些分区表

    29.        Flash Candy5 with TWRP. It's only 239 MB, so it will flash quickly.
    在TWRP里安装Candy5.zip 。只有239MB ,所以很快就刷完了。

    30.        I do this because Candy5 will reformat mmcblk0p33 from ext2 to ext4 for you.
    这样做,是因为Candy5会重新格式化 mmcblk0p33 ,从 ext2 格式成 ext4 。

    31.        It does this as part of it's system boot, apparently.
    显然,这个操作作为系统启动的一部分

    32.        If you install a different ROM that does not do this, you can reformat it by running `make_ext4fs /dev/block/mmcblk0p33`.
    如果你安装的是不同的ROM,那就不要这样做。可以输入‘make_ext4fs /dev/block/mmcblk0p33’来重新格式化

    33.        If your ROM does not have make_ext4, it likely has some differnt method to make an EXT4 filesystem. `/system/bin/mke2fs -t ext4 /dev/block/mmcblk0p33` may work better. Just flash Candy5 and be done with it.
    如果你的ROM没有格式成ext4 ,可能要用另外的方法制作一个ext4文件系统 ,‘/system/bin/mke2fs -t ext4 /dev/block/mmcblk0p33’ 这个命令或许更好。然后只需要刷新Candy5并完成它

    34.        Tap Wipe > Swipe to Factory Reset.
    点击 Wipe ,Swipe to Factory Reset。恢复出厂状态。

    35.        Tap Reboot > System.
    点击 Reboot,System ,重启到System

    36.        WAIT!!! It will take a minute for the ROM to start the first time. You will have white lines and and possibly a white screen. WAIT. It's moving the DEX files to cache, formatting a partition, creating default folders on the internal storage, and several other things. WAIT! When the screen goes dim or turns off then it's ready.
    等待!!!开始有一分多钟,你会看到白线并充满屏幕。继续等待,系统将移动DEX文件到缓存,并格式化分区,在内部存储创建默认文件夹,和一些其它的事情。继续等!当屏幕变暗,那么就准备好了。(在开机界面要接近10分钟,耐心等待)

    37.        Cycle the display or turn it on. You should be at the Candy5 lock screen.
    循环显示或将其打开。你应该在Candy5锁定屏幕。

    38.        USB debugging is on by default. Run "adb shell".
    USB调试模式,运行‘adb shell’

    39.        `mount | grep userdata` Make sure mmcblk0p33 is mounted.
    ‘mount | grep userdata’,确认安装 mmcblk0p33

    40.        `df` Make sure /data is 11.3 GB (or whatever size it is on non-16GB devices).
    ‘df’ ,请务必确认 /data 是11.3GB (如果不是16GB的设备,则是另外的大小)

    41.        HELL YEAH, you downgraded, rooted, and fixed the partition problem. Enjoy your tablet!
    终于,完成了,降级,root,修复分区问题。享受你的平板吧!


    Thanks to dopekid313 for finding the KDZ.
    感谢 dopekid313提供KDZ
    Thanks to timmytim for Candy5.
    感谢 timmytim 提供Candy5
    Thanks to the creators of the root script, flashify, TWRP, and XDA for being so awesome.
    感谢跟脚本的创建者,flashify,TWRP,还有XDA,都太棒了
    Thanks to marcsoup for fixing a fix to the white lines.
    感谢marcsoup提供修复白线的方法
    Thanks to navin56 for the partition dumps. PLEASE thank his post!
    感谢navin56 ,提供分区修复的方法。感谢他的文章。


    White lines fix.
    白线修复。

    What we are going to do is flash the aboot partition with the stock image provided by navin56. I've removed the extra files from the dump, so simply download aboot.img.7z below. Unzip it using 7zip.
    我们准备进行的flash引导分区文件由navin56提供,我已经打包到aboot.img.7z,下载解压即可。

    These commands are to be run in TWRP. Reboot to TWRP recovery and connect with "adb shell". All of the following commands will be run in ADB under TWRP. If you cannot figure out how to get here, please post in the thread and someone will help you. Onward:
    这些命令都在TWRP中运行。重启引导到rec界面,使用‘adb shell’命令连接adb。下面所有的命令都是在TWRP界面下用adb运行的,如果你不知道怎么做,请看下面的帖子:

    If you do everything correctly then you don't have to reflash your ROM and you won't lose data. This process can be done any time after flashing the KDZ, even before you follow the steps above to resize the userdata partition. It's a completely separate process.
    如果你做的都正确,你不需要刷新ROM ,数据不会丢失。这个过程可以在刷完KDZ后的任何时间做,甚至在你按照上面的步骤来调整userdata分区之前的任何时间。因为这是一个完全独立的过程。

    1.        Unzip aboot.img.7z so you have the file named aboot.img. You should also make sure that aboot.img's MD5 sum is e97431a14d1cee3e9edba513be8e2b52. Do not flash the 7z file. Please.
    解压aboot.img.7z得到文件aboot.img。你应该确保img文件的MD5码是e97431a14d1cee3e9edba513be8e2b52,请不要更改7z文件。

    2.        Copy aboot.img to your external SD card. It should live at /sdcard/aboot.img
    复制aboot.img文件到SD卡。文件目录是 /sdcard/aboot.img

    3.        Boot to TWRP and run "adb shell"
    引导到TWRP并运行 ‘ adb shell ’

    4.        `ls -al /dev/block/platform/msm_sdcc.1/by-name/` Let's make sure we are flashing the right partition. On my device "aboot" is /dev/block/mmcblk0p6. You should verify this on your device or you WILL brick your tablet.
    ‘ ls -al /dev/block/platform/msm_sdcc.1/by-name/ ’ ,让我们确认我们正在刷新的是正确的分区。在我的平板上“aboot”是 /dev/block/mmcblk0p6 。你应该验证你的是不是。出错将使平板成砖。

    5.        `dd if=/dev/block/mmcblk0p6 of=/sdcard/aboot-fukt.img` Let's back up our current aboot partition before we go flashing things just in case there are unintended consequences later. Be sure you have the same partition that "aboot" referred to in the 4th step or you have just backed up the wrong partition.
    ‘dd if=/dev/block/mmcblk0p6 of=/sdcard/aboot-fukt.img’ ,在刷新之前先备份引导分区,防止意想不到的事情导致意想不到的后果。确保你备份的是第4步中的引导分区,千万别搞错了。

    6.        `dd if=/sdcard/aboot.img of=/dev/block/mmcblk0p6` Be sure the file exists, is the correct aboot.img, and you are flashing the right partition. You have been warned!!
    ‘ dd if=/sdcard/aboot.img of=/dev/block/mmcblk0p6 ’,确保这个aboot.img文件存在,并且放在正确的地方,之前已经警告过!!

    7.        Reboot TWRP and enjoy your boot animations again.
    重新引导到TWRP ,再次享受原装的启动画面吧 !

    If I missed anything, please let me know. As far as I know this is the very first tutorial that details what is necessary to accomplish this. Please hit the Thanks button on every thread that you visit to download files!
    如果我哪里写错了,请告诉我。这是初步教程,不过必要的步骤都已经详细介绍了。
    请在每个下载文件的感谢按钮上点击一下!



    FAQ:

    Q: Why do I only have 11.3 GB of space when my device is 16GB?
    我的平板内存是16GB,为何空间只有11.3GB

    A: The entire internal SD card (eMMC) is 16 GB. Gotta have someplace to install the bootloader, recovery, android, the modem OS, the secondary bootloader, the cache, the resource and power manager, and all of the other partitions necessary for the table to operate. Please look at the second screenshot in the OP. All of those 33 partitions take up room on the internal card. Fortunately ALL of those partitions ONLY take up about 4.4 GB.
    答:整个内部存储是16GB,被引导程序、系统、缓存、资源等占用一些。请看下面第二张图中文件夹,这些占用了内部存储的33分区上。幸运的是,只占约4.4GB。





    Hence the 'userdata' partition is ~11.3 GB.
    因此,‘userdata’分区实际是~11.3GB。
    v410fixed.png
    v410parttable.png
    htc desire g7  喜羊羊小顽皮

    3

    主题

    0

    好友

    77

    积分

    初中生

    Rank: 3Rank: 3

  • TA的每日心情
    无聊
    2017-3-2 11:00
  • 签到天数: 13 天

    [LV.3]偶尔看看II

    G币
    28
    最后登录
    2017-3-29
    注册时间
    2011-11-12
    发表于 2017-3-13 22:47 |显示全部楼层
    今晚又重新刷了一遍,从cm13降级kdz,然后修补分区,修补开屏白线,一切顺利,按照说明一步一步操作没有任何问题!
    moto xt316  钱多多的手机铃声
    您需要登录后才可以回帖 登录 | 注册

    网上有害信息举报中心|手机版|机锋网 ( 京ICP备15020343号 | 京公网安备11010802020450号

    GMT+8, 2017-3-30 05:15

    Powered by Discuz! X2.5

    © 2001-2012 Comsenz Inc.

    回顶部